The ® SmartGate™ is a multi-device GPS application Interface. It can be used to send and receive signals from devices such as an aerial camera. In photogrammetry applications, software running on a portable computer could trigger the camera at specific pre-determined locations. The SmartGate™ would then be directing events from the computer to the camera. In an intervalometer camera mode, the application could also records events as the camera shutter sends its pulses to the SmartGate™.


FEATURES :

    • Compatible with almost all aerial cameras on the market
    • Easy to use, just plug in a standard computer keyboard port
    • Switch configurable output and input functions
    • Optoisolated inputs

SPECIFICATIONS :

    • Output
    • Input
    • Physical
    • Input/Output connectors
    • Power Consumption
    • Operating Environment
    TTL Signal 330 pull up resistor to 5V
    or N-O Contact closure, contact ratings 2A/30VDC
    Pulse signal square waveform: ±28Vmax, ±5Vmin
    Input Current 21mA@28V
    or Contact closure 25mA max drain currant
    Size 45mm x 130mm x 181mm
    Finish Extruded black anodised aluminum
    Weight Approx. 0.64kg
    M1 connector MS3102A14S-6S mates with MS3106A14S-6P
    M2 connector MS3102A14S-6P mates with MS3106A14S-6S
    Power is supplied by the computer keyboard port (<150mA)
    Temperature 0 to 70° C
    Relative humidiy 0% to 95%, Non-Condensing     

  • Technical Specifications Information in this document is subject to change without notice